|
|
Advanced Coastal Cruising Standard (ASA106)
Prerequisites: Basic Keelboat Sailing, Basic Coastal
Cruising, Bareboat Chartering and Coastal Navigation Certifications.
General Description: Able to safely act as skipper
and crew of a sailing vessel about 30 to 50 feet in length
'm coastal and inland waters, in any conditions.
SAILING KNOWLEDGE
A Certified Sailor has successfully demonstrated his or
her ability to:
- Describe the theory of true and apparent wind.
- Describe the theory of sailing using force diagrams.
Graphically find the center of effort and center of resistance
of sails and keel, respectively.
- Describe with the aid of diagrams the causes of lee
and weather helm and methods of correcting them. Include
the reasons for preference of slight weather helm, sail
selection (including full sails or reefed sails), mast
position and mast rake.
- Describe sail shapes and sail interactions as needed
for different wind strengths and points of sail. Describe
the effects on sail shape and sail interactions when adjusting
the following:
| Luff tension |
Outhaul |
Downhaul |
| Leech line |
Boomvang |
Cunningham |
| Backstay tension |
Jib fairleads |
Jib sheet tension |
| Mainsheet |
Traveller |
|
Weather
- Identify how to use a barometer and a thermometer either
singly or together to assist in predicting weather.
- Describe cirrus, cirrostratus, altocumulus, stratocumulus,
cumulonimbus and cumulus clouds and the weather expected
to be associated with each.
- Describe local weather in relation to thermal winds
and prevailing winds.
- Describe three sources of weather information available
to yachtsmen in the United States.
Seamanship
- Describe the proper selection of sails on a given boat
for all weather conditions and give reasons for the selection
made.
- Describe the appropriate heavy weather precautions for
the boat selected and describe how they are carried out.
Include sail changes, use of special equipment (safety
harness, sea anchor), doubling up of gear, special checks
in areas liable to chafe, stowage of equipment (above
and below decks), additional checks on condition of bilge,
special arrangements for towing dinghy/tender (if used),
problems of fatigue, selection of clothing, and the need
of at least two on deck at all times.
- Describe all the steps to be taken by skipper and crew
for "heaving to" and "lying ahull."
- Describe the methods Of rafting at anchor and the possible
problems with day and night rafting.
- Describe how to prevent the tender/dinghy from riding
up and bumping the vessel’s hull while anchored at night.
- Describe step by step how to secure a boat overnight
with one anchor and stem made fast to the shore or dock.
- Describe two methods of using a second anchor to reduce
swinging.
- Describe four different methods of recovering an anchor
which is fouled on the bottom.
- Describe when and how to use a trip line and an anchor
buoy.
- Describe when and how to set an anchor watch and the
responsibilities of such a watch.
- Describe how to:
- Prepare a towing bridle
- Pass a tow to another boat
- Get underway with a tow and which speeds to use
- Avoid fouling the propeller
- Avoid danger of towline parting under stress
- Make proper lookout arrangements
- List from memory the visual distress signals listed
in the applicable U. S. Coast Guard publications.
- Describe how the boat should be handled and what actions
should be taken when the following emergencies occur while
under sail-
- The boat is dismasted
- The boat runs aground on a lee shore
- Describe how the boat should be handled and what remedial
action should be taken when the following emergencies
occur while under power:
- The engine cooling water fails to flow.
- The engine fails in a crowded anchorage.
- The engine fails in a busy channel.
- State the fuel tank capacity and range of the selected
boat and thefactors that could affect its range.
- State the water tank capacity on your boat and the minimum
water requirement per person-
- Describe the skipper's responsibilities and action for
the following common courtesies and customs of yachtsmen:
- Permission to board.
- Permission and entitlement to come alongside.
- Permission and entitlement to cross adjacent boats
when rafted.
- Rights of first boat at an anchorage.
- Keep clear of boats racing (even though cruising
boats may be the "stand on boats").
- Offering assistance to yachtsmen in trouble.
- Flag etiquette: National flag, Courtesy flag, Burgee/house
flag, Dipping flag.
- Lines dangling over side.
- Fenders over side when underway.
- Checking of boat's appearance (shipshape & Bristol).
- List the documents required and the procedures followed
when leaving and entering U.S. territorial waters.
Engineering
- Describe and demonstrate the appropriate collective
measures for the following common engine problems as applicable
to the boat selected:
- Stoppage in fuel line
- Burned and defective points
- Fouled spark plug/injector problems
- Carburetor icing (spring and fall sailing)
- Unserviceable starter
- Electrolysis
- Describe when and how to carry out an oil change in
the engine selected.
- Describe the minimum preseason maintenance and checks
given to the following:
- Hull (including underwater fittings, electrical
systems, painting, antifouling)
- Spars and rigging (including electrolysis)
- Sails
Safety
- Describe recommended permanent and temporary installation
methods of grounding for lightning.
- State the factors you would consider before allowing
anyone to go swimming while the boat is at anchor.
- State the danger of overhead power lines.
- Describe the uses, capabilities and limitations of a
portable radar reflector.
SAILING SKILLS
Boat Handling Under Sail (by Day and Night, 30 hours
minimum ASA instructional program)
A Certified Sailor has successfully demonstrated
his or her ability to:
- Act as helmsman and demonstrate the proper techniques
of beating, reaching, running, tacking, jibing, heading
up, heading down (bearing away) and luffing in approximately
20 knots of wind.
- Work to weather to best advantage using wind shifts,
tides and local geography.
- Sail a compass course (within 10 degrees) with sails
trimmed.
- Demonstrate correct methods of towing a dinghy.
- Properly carry out nighttime man overboard procedures.
- Demonstrate correct procedures for hoisting, setting,
trimmings, jibing, dousing and packing a spinnaker.*
- Anchor, weigh anchor, pick up and cast off moorings
while acting as helmsman and/or crew.
- Demonstrate how to take a sounding using two different
methods.
- Stand a navigation watch during a passage of about 20
miles by night and 20 miles by day and demonstrate all
of the skills required for the ASA Coastal Navigation
Standard.
*Spinnaker work is optional. The certifying instructor
will indicate spinnaker use in the certification box on
page
|